The most effective ways!
iPad is recognized as the best and most reliable tablet. Even the old iPads work great after many years of active use. However on the iPad it may fail, for example, the tablet may no longer be included. What to do if iPad is not included? In this tutorial talked about the most effective and efficient ways to solve problems.
iPad wouldn’t turn on? The following describes all of the most effective ways of solving this problem. We recommend adhering alternately first to last — one of the steps your iPad will work again!
1. Check the cable and charging adapter
You first need to make sure that the iPad no longer turn on not draining the battery. Many will be surprised, but often the problem really lies in the fact that the iPad is fully depleted, but not charging due to breakage of the cable or the charger.
To ensure that the problem is not with the accessories quite simple. Try charging using the cable and charger adapter and another device, e.g. iPhone. If charging starts, so the accessories are not damaged and you can proceed to following ways.
2. Make sure the connector iPad not clogged
Often iPad is not charging, and with it not included, due to the fact that the charging port of the tablet is clogged. This happens most often on older tablets, which are in active use.
Clean the charging port, for example, with a toothpick. It is important to proceed with caution and remove any accumulated debris from the slot gently. In especially advanced cases, various debris in the connector accumulate really many, like on the following image:
After cleaning the connector again try charging the iPad. If now iPad is not included — turn to software solutions to problems.
3. Perform a hard reboot iPad
Let’s start with the simplest way to “reinvigorate” the iPad, which is often salutary. Often iPad not included due to the occurrence of a software error that needs to be reset. It is very simple — you want to run the so-called “hard” reboot.
On iPad you need to simultaneously hold down the buttons “Home” and “Food and keep them until, until the screen of the tablet does not Apple logo appears (10-15 seconds).
If the Apple logo appeared iPad saved! The tablet will turn on and will work as before. If “hard” reset to nothing brought, proceed to the following method.
4. Enter iPad recovery mode
Following an effective way to solve the problem — activating the recovery mode on the iPad. The successful introduction of the iPad in recovery mode will bring it back to life with the help of iTunes.
In order to introduce the iPad in recovery mode you must perform the following steps:
Step 1. Hold down the “Home” on the iPad and while holding it connect the tablet to the computer using the USB cable.
Step 2. Continue to hold the button “Home” as long as the iPad does not appear the logo of iTunes.
If the iPad reacted and went into recovery mode, you will be able to recover the tablet.
After the introduction of the iPad into recovery mode you need to run iTunes. As soon as the program starts, it signals the presence of the iPad and will offer to update or restore the device.
You first need to try to update the iPad, as in this case, get rid of the problem without data loss. However, if your iPad was previously updated to the latest iOS version, then, of course, his update will fail.
In this case, it will only select “Restore”. After restoring the iPad will begin to turn on, but all data will be erased. To use this method is recommended only in those cases if you have recently created a fresh backup of your iPad.
5. Restoring the iPad in DFU mode
iPad does not turn on despite all of the methods above? Fortunately, was the most effective way to solve the problem. It provides for the introduction of the tablet in DFU-mode and restore it works with third-party utilities to fix bugs of iOS devices.
iPad not included — restore via DFU mode
Step 1. Download the latest version of utility Dr. fone from the official website of the program.
Step 2. Install dr.fone and run the utility. It is important to close iTunes as the program from Apple will not interfere with the recovery process.
Step 3. In the main window of the program.fone select Repair. The utility allows you to fix various errors on iOS devices, including the problems, which iPad is not included sludge stuck in recovery mode.
Step 4. In the opened window, click Start to start the discovery process iPad.
Step 5. Since your iPad is not included, the program will not detect it prior to the introduction into DFU mode. In the next window, the utility will notify — click the Device is connected but not recognized.
Step 6. In the new window, the program asks you to enter iPad into DFU mode. To do this:
1. Simultaneously press and hold the Home button and Power for 10 seconds.
2. Release the upper “Power” button but keep holding the Home button for another 10 seconds — as long as the utility does not detect your iPad.
If you did everything correctly, the utility window will appear on your iPad:
Note that at this stage the utility of Dr. fone has the ability to run interactive guide showing how to enter iPad into DFU mode.
Step 7. Following the successful introduction of the iPad in DFU mode click Next.
Step 8. In the new window, click Download to begin download the current firmware for your iPad. The utility will automatically download the correct version of firmware for subsequent recovery.
Step 9. After loading is complete, the firmware will remain to press the button Fix Now to start the recovery process. Make sure that the tick on the Retain native data set — this parameter is responsible for maintaining all data on your device.
If none of the above methods did not help, then, unfortunately, we are talking about damage to the iPad. Moreover, the breakage can be absolutely any is to determine what exactly is broken help only in the service center.